N1 represents the rotational speed of the low pressure compressor and is presented on the indicator as a percentage of design rpm. After start the speed of the low pressure compressor is governed by the N1 turbine wheel. The N1 turbine wheel is connected to the low pressure compressor through a concentric shaft.
Popular
-
Becoming a Pilot - aeronautical airplane engineeringThe course of instruction a student pilot follows depends on the type of certificate sought. It sh… -
Leading Edge DevicesHigh-lift devices also can be applied to the leading edge of the airfoil. The most common types are…
-
Rate of Turn (ROT)The rate of turn (ROT) is the number of degrees (expressed in degrees per second) of heading change…
-
14 CFR PART 21 SUBPART O—TECHNICAL STANDARD ORDERS (TSO)A Technical Standard Order (TSO) is issued by the Administrator and is a minimum performance stand…
Post a Comment
Post a Comment